Warning, no confirmation!ĭestroys all data on the NAND, including RouterOS configuration and license Suppresses all output on the serial port, in case some device is connected to it (like a GPS device or a temperature monitor) The button that will open the configuration menu This example shows the menu which is available in RouterBOOT 7.4beta4:ĭelays starting of RouterOS to allow an interface to initialize We suggest disabling the hardware flow control. RouterBOARD serial port is configured to 115200bit/s, 8 data bits, 1 stop bit, and no parity. The required cable is described in the Serial Console manual. ![]() Configurationįor RouterBOARD devices that feature a serial console connector, it is possible to access the RouterBOOT loader configuration menu. ![]() The reset button has the same functionality as on other devices, explained in detail ĥ-second button hold on startup (USR LED light starts flashing) - resets to password-protected state.ġ0-second button hold on startup (USR LED turns solid after flashing) - completely removes configuration. Configuration Reset For Wireless Wire kits To do the above actions without loading the backup loader, push the button right after applying power to the device. If you hold the button before applying power, backup RouterBOOT will be used in addition to all the above actions.
0 Comments
Leave a Reply. |